Metal Roofing in George — IBR, Kliplok & Standing Seam

Metal roof installation across George and the Garden Route. IBR, Kliplok, corrugated and standing seam profiles in Chromadek, Colorbond, galvanised and Zincalume. SANS-compliant, engineered, and installed with a written workmanship guarantee.

✓ IBR, Kliplok, Corrugated ✓ Chromadek & Colorbond ✓ Engineer sign-off ✓ Workmanship guarantee

Get a Free Quote →

Call 073 160 7619

Every Metal Roof Profile That Matters

Metal roofing is the dominant roofing system across the Garden Route for good reason — it handles the rain, the wind and the salt air better than almost anything else, it’s fast to install, and with the right profile and coating it lasts decades. TreadstoneCPM installs the full range: IBR, Kliplok, corrugated and standing seam.

The right profile depends on the pitch of the roof, the span, the look you want, and the budget. We’ll talk it through with you on the site visit and quote all the real options — not just the one profile our supplier is pushing this month.

What Metal Roofing Includes

Profile selection — IBR for cost-effective new builds, Kliplok for clean lines and concealed fix, corrugated for traditional look, standing seam for high-end projects. We’ll recommend what fits.
Coating & colour — Chromadek, Colorbond, galvanised and Zincalume in the standard colour range. Longer-life AZ200 coatings for coastal exposure.
Engineered fixings — Correct purlin spacing, correct fastener type and torque, and proper wind-uplift fixings for the Garden Route’s wind zone.
Flashings & accessories — Matching ridge caps, barge flashings, valley troughs, eaves closers, apron flashings and penetration flashings in the same coating.
Insulation options — Double-sided reflective foil, mineral wool, or spray-foam under the sheeting where thermal performance matters.
Written workmanship guarantee — A written workmanship guarantee on the install, layered on top of the manufacturer coating warranty.

How a Metal Roof Install Runs

1. Site visit & measure

Measure the roof, check the pitch, look at the existing structure or trusses, and talk you through profile options and colour choices.

2. Written quote

Line-item quote with fixed price, fixed programme, exact profile and coating spec, insulation option and workmanship guarantee. Nothing starts without sign-off.

3. Install & sign-off

Tidy strip-out (if re-roofing), install, flashings, clean-up, and handover with written workmanship guarantee and manufacturer coating warranty.

Metal Roofing FAQs

What’s the difference between IBR, Kliplok and corrugated?

IBR is a trapezoidal profile with exposed fixings — cost-effective and proven. Kliplok is a concealed-fix standing-seam profile — cleaner look, lower-pitch capable, higher cost. Corrugated is the traditional wavy profile — classic look, still reliable. The right choice depends on pitch, span, budget and look.

Is Chromadek or Colorbond better?

Both are high-quality colour-coated steel systems with similar performance on most sites. Colorbond has longer proven coastal durability, Chromadek has wider colour selection and is usually slightly cheaper. For coastal Garden Route projects we’ll usually recommend the higher-spec coastal-grade coating either way.

Will a metal roof rust on the coast?

Not with the right coating. We use AZ200 Zincalume base with Colorbond or Chromadek topcoat for coastal exposure, plus matching coated fasteners and flashings. Cheap galvanised roofs on the coast rust within 5–10 years — properly specified metal roofs last 30+ years.

Is metal roofing noisy in the rain?

Not with insulation. A layer of double-sided reflective foil, or a proper mineral wool or spray-foam layer under the sheeting, brings the rain sound down to the same level as a tile roof. We’ll quote the insulation as part of the install.

Can you re-roof an existing home from tile to metal?

Yes, provided the existing structure can take the load change (metal is usually lighter than tile, but the fixing method is different). We check the trusses and wall plates before quoting, and our engineer signs off the change in roofing system.